Original Saw Company 12" Radial Arm Saw Model 3512-01 ~ 3-HP ~ 1-PH W/ Blades

This is a nice saw with a 21-3/4" long cut and up to 3-1/4" thickness cut.

Oneida Air Systems Super Dust Deputy XL DIY Cyclone Attachment, Accessory Only

ONEIDA SUPER DUST DEPUTY 6" XL CYCLONE. WE BELIEVE OUR SERVICE IS TOP RATE, WE HOPE YOU WILL TOO. ALL THE BEST FROM OUR FAMILY TO YOURS. MIKE, SHERI, AND NICK.

Router Jig Template For Bowtie Inlay Wood Working / Bowtie + Insert Jig Included

Create precise and elegant bowtie joints with this all-in-one cutting jig—perfect for both woodworking professionals and hobbyists. Bowtie Joint Cutting Jig – 3 Sizes Included. Bowtie Sizes Add strength and visual appeal to your work with this simple, effective jig.

VEVOR 4'' x 50' Dust Collection Hose Thickened PVC Flexible Clear Hose

Its highly transparent body allows for easy viewing of internal flow conditions. It can withstand dust and debris from cutting, milling, or sanding wood during use without being punctured. 4" x 50' Flexible PVC Dust Collection Hose.

Beam Saw For Sale

This Beam Saw is a must-have for your woodworking equipment collection. It is perfect for cutting post-formed laminate tops and suitable for use with wood and laminate materials. The saw comes with a hand crank and is in fair condition. Sold as is where is. Buyer must pickup.

NEW DELTA 882 RETIREMENT LIGHT

NEW DELTA 882 WORK LIGHT. These lights have been getting harder and harder to find, so we decided to reproduce the popular little work light, as an even better product than the original Delta light. The OEM linkage was zinc plated carbon steel and eventually would corrode.

Blum ECODRILL for Clip Top, Modul, Avento Hinges M31.1000 Boring Bits Included

ECODRILL is a simple device for boring the Blum hinge. - Includes drill bits (pre-installed) and two Torx driver bits. - Variable boring distance from 2 to 8 mm. - Driven by electric/cordless drill (14v or better).

OFFICIAL Dustopper PRO - Low-Profile Dust Separator for Wet/Dry Vacs - Sep. Only

WE ARE THE OFFICIAL MAKERS OF THE DUSTOPPER - Already have hoses and elbows?. Capturing dust before it plugs up your filter is a great way to save money. It collects up to 99.9% of debris before it reaches your vacuum.

Bend Master Laminate Postformer Formica Edge Heater Countertop Laminate Bender

• Mounted to countertop jig. • Bend Master Corp., Wayne NJ. • Aluminum heating tube. • Adjustable heat dial. • Lights show power / heat.

Delta Drill Press Table Elevation Crank Handle P/N 1344258 (machine list below)

The handle is made from durable plastic with steel inserts which prevents the handle from being fragile such as the old cast iron versions which tend to break easily. Compatible with the following Delta drill press models.

FS Tool 122x80x40 Corrugated Shaper Moulder Cutterhead with Guhdo Knives 1...

Rikon 1/2 Hp Mortiser With X/y Adjustable Table

Bench top x-y mortising machine #34-260 gives precision positioning of your work for boring mortises because of the sliding, x-y axis table. The front clamp pushes work against the cast iron rear fence, as well as acting as a hold down.

Jet Combination Sander 48" x 6" Belt / 9" Disc 3/4 HP 115v 1 Ph JSG-96 Damaged

Combination Belt / Disc Sander. Sander is in otherwise good condition. Tested and functions without issue. Belt Length - 48”. Belt Width - 6”. Belt Speed - 2250 FPM. Disc Speed - 1725 RPM. Paste link into a browser window:[isdntekvideo].

Dustopper High Efficiency Dust Separator

Bucket and collects more than 99% of dust and debris before it reaches your vacuum. It’s easy to set up and can be ready to go in under a minute, straight out of the box. No holes to drill, no screws to tighten and no sealants to apply.

Powermatic Belt and Disc Sander Power Matic Model 30 Houdaille

PowerMatic Houdaille Belt & Disc Sander. Sander is in very good used condition & has been well maintained. Powerful 1.5 HP motor.

Vintage Wisconsin Knife Works -Badger Moulder Head. Antique Doors. Windows

A vintage Wisconsin Knife Works- Badger moulder head in excellent condition! 1 1/4” arbor. Not much info around on these. I think you can still buy tooling for it. I believe it was used to make doors and windows based on the tooling I received with it. I have boxes of tooling for it if there is any interest in the head. Don’t see these very often!

Milwaukee Portable Bandsaw Table w/ Heavy Duty Clamping Chain 48-08-0260

Portable Bandsaw Table. Heavy-duty clamping chain and crank nut easily secures all shapes of material. Converts Milwaukee's portable band saws to stationary units. Can be mounted on work bench or used with 3/4 in.

(5) Plastic Dust Collector Lower Bags for Delta model 50-720 & 50-720CT, 50-721

5 piece set of dust collector bags which fit theDelta model 50-720 and 50-720CT 1HP dust collectors. The clear bag adds the convenience of being able to see the chip levels in the dust collector to avoid overfilling.

Delta SA446 Shopmaster 4" Belt/6" Disc Sander 1/3HP 120V 3450RPM 1PH

3-Inch Diameter Pneumatic Blast Gate, Metal Work Solenoid Valve & Cylinder

3-Inch Diameter Pneumatic Blast Gate, Metal Work Solenoid Valve & Cylinder 8.5” x 6” Galvanized steel gate Metal Work solenoid valve 7010021200, 5-port (4-way), 2-position, single solenoid spring return, 1/8in female NPT inlet(s), 1/8in female NPT outlet(s), 1/8in female NPT exhaust(s), Cv=0.55. Metal Work 1123250090CP Pneumatic Cylinder, 25mm bore, 90mm Stroke, 10 bar, no lube ISO 6432